|
|
|
 |
|
Pages 3 of 11 |
|
------------------------------------------------------------------------------------------------------------- |
|
 |
|
20) Modeling Glue |
| Non-sagging modeling glue for woodworks, polystyrene,
cement and plaster. Dries clear waterproofed and flexible. Complete with syringe
applicator for clean non stringing detail works unlike solvent glue. |
|
|
------------------------------------------------------------------------------------------------------------- |
|
 |
|
21) Pouring hole opener |
|
Pouring hole opener for plaster mold making. Carbon
steel serrated hole opener for greenwares |
|
|
------------------------------------------------------------------------------------------------------------- |
|
 |
|
22) Porceline tiles |
|
Round Tiles-Glazed |
-
9cm / 3.03 inch X 4mm thick- England
-
5.2cm/2 inch X 3mm thick- Japan
-
4.5cm/ 1.5 inch X 3mm thick-
Japan
|
|
 |
|
Round Tiles-Un-glazed |
|
10cm/ 3¾ inch X 5mm thick- USA |
| |
|
Oval tile-Glazed |
-
5.5cm/ 2 inch X 3mm thick- Japan
-
4cm/ 1.5 inch X 3mm thick- Japan
|
|
|
Perfect for China painting + framing. Metals holder
available as brooches. Pressed flowers setting and decal firing. |
|
------------------------------------------------------------------------------------------------------------- |
|
 |
|
Square |
|
 |
|
Rectangle |
|
 |
|
Triangle |
|
|
23) Glass Tiles |
| |
|
Chamfered polished edge glass tiles in various sizes
for stain glass painting. Ideal for press flowers setting as well. |
| |
|
Square: 10cm X 10cm |
| |
|
Round: 15.8cm |
|
|
Rectangle: 7.5cm X 15cm |
|
|
Triangle |
|
10cm X 10cm X 10cm |
|
12.5cm X 12.5cm X 12.5cm |
|
|
------------------------------------------------------------------------------------------------------------- |
|
 |
|
24) Lino Cutter |
| 5 pieces safety cutter set for pull back cutting of
lino sheet. Good design with blade storage within tool handle. |
|
|
------------------------------------------------------------------------------------------------------------- |
|
 |
|
25) Microbrush |
| Rounded tip. Smaller and finer than cotton buds.
Micro brushes bend easily to any angle for the placement of small controlled
amounts of material in areas of limited access. It is possible to reach areas
that were not accessible before the introduction of the Micro brush. |
|
|
------------------------------------------------------------------------------------------------------------- |
 |
|
26) Micromotor |
| Hand set speed control or variable foot control speed
0-35,000 RPM 110/220V 50Hz-60Hz. Hand piece accepts 2.35mm bits. Micro sculpting
or carving use for master and mold making. Practical for glass etching and
engraving. Complete with hand piece holder. |
|
|
------------------------------------------------------------------------------------------------------------- |
 |
|
27) Investment Vibrator |
| Variable speed vibrator for mold making to eliminate
airbubbles. 220V. Vibrating platform- 11cm. |
|
|
------------------------------------------------------------------------------------------------------------- |
 |
|
28) Glaze Sieve |
|
Rust free wooden frame 15cm X 15cm with stainless steel mesh #100 or
#200. Suited for small volume sieving of glazes. slip clay and
colors.
Complete with flexible plastic scrapper. |
|
|
------------------------------------------------------------------------------------------------------------- |
 |
|
19) Turning Tools |
|
Set of 6 piece carbon steel sharpened turning tools
for plaster of Paris or leather hard clay. Profiles approx 3-4cm. Length-
27cm. |
|
|
------------------------------------------------------------------------------------------------------------- |
 |
|
20) Carbon Steel Rakes |
|
Set of 6 piece carbon steel sharpened turning tools
for plaster of Paris or leather hard clay. Profiles approx 3-4cm. Length-
27cm. |
|
|
------------------------------------------------------------------------------------------------------------- |
 |
1
2
3
4
5
6
7
8
9
10
11 |
 |
|
