|
|
|
 |
Proxxon GMBH is a manufacturer
of precision tools and machinary.
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
| Bench
circular saw KS 230 |
| The
58mm diameter Super Cut blade cuts soft wood up to 8mm, plastics to
approximately 3mm, non-ferrous metals to approximately .5mm.
Fibreglass reinforced PC cards could be cut with tungsten blade.
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
| MICRO
compound table KT 70 |
| Made
of solid aluminium with surface treatment and fitted with adjustable
dovetail slides and three T slots to the MICROMOT standard
(12x6x5mm). Adjustable ruler ease workpiece positioning. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
| Drill
Sharpener |
| Enables
people to sharpen standard 118˚ HSS, CrV and tungsten bits of 3-13mm
diameter professionally. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
| Grinding
and polishing machine SP/E |
| The
slim housing facilitates the grinding of long workpiecesand includes
an adapter to connect a vacuum cleaner to the unit. The tool rests
and eye guards are both adjustable. A spindle lock eases the
changing of wheels and disks. Supplied with a 50 X 13mm corundum
(grade N) and silicon carbide (soft compound) for general grinding/
sharpening of hard materials respectively. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Lathe PD
230/E |
|
Usable on materials such as
plastic, steel, brass and aluminium. Complete with automatic feed,
thread cutting capability, headstock chuck, live centre and top
slide for taper turning. Used to part, machine stock and cut tapers.
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Disc Sander |
|
Sands long edges, and sections,
radii, mitres, and by turning work pieces over- accurate flat
surfaces at right angles. Used on soft and hard woods, non-ferrous
metals, steel, plastics (plexiglass and fibreglass), cork and
rubber. A simple chart indicates the recommended speeds on different
materials. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Micro Band Saw 230/E |
|
Solid, ribbed die-cast aluminum
housing (not a tubular or sheet metal construction). Double ball
bearing aluminum pulleys, sturdy, machined table with slot for mitre
gauge as well as coolant trough. Table tilts through 45˚ for
accurate mitre sawing. |
|
Technical data:
220/240V. Speed variable
from 120-250m/min. (with feedback effect). Throat depth 150mm. Max. workpiece height: 80mm, worktop 200 X 200mm (adjustable from 0 to
45˚). |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Micro Miller MF70 |
|
Supplied complete with base
of cast iron and both vertical column and compound table of treated,
quality aluminum. All axis are play-free and have adjustable slides.
Headstock of die cast aluminum contains the 24 pole balanced special
motor and is super stable even at high speeds. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Micromot 40 & 40/E |
-
1001 uses: milling, drilling,
routing, de-scaling, polishing, cutting, cleaning, sawing,
engraving, etc.
-
Useable on any workable material
e.g. steel, precious metals, glass, ceramics, plastics, precious
stones, etc.
- Ideal for electronic hobbyists,
model makers, tool and die makers, jewellers, opticians, artists,
chiropractors, dental technicians, etc.
|
| |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Motorised carver SGM |
| Perfect
for carving all wood types, e.g. renovating and working on
furniture, reconditioning antiques, lino cutting, delicate paint
removal and working plaster of paris. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Precision Drill / Grinder FBS 230/E |
| Use it for milling.
drilling, grinding, polishing, brushing, cleaning, derusting,
sawing, carving, engraving etc. |
| Technical data:
5000- 20,000 rpm. Maximum power consumption 100W, 230V, keyless
chuck with 0,5-2,3mm capacity. Length 185mm and weight 450g. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Precision Vice FMS 75 |
| Zinc
die-casting with ball and socket: rotates in all directions (even
downwards). 75mm jaws with proactive covers (for delicate work
pieces). Jaws also with vertical and horizontal V-slots for clamping
fixing to any smooth, flat surface. May also be screwed down.
Maximum clamping width 70mm. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Machinists vice |
| Fitted
with interchangeable, hardened jaws, slotted vertically and
horizontally so round and odd shaped objects may be clamped. Both
jaws are slotted at the top, facilitating gripping of flat work
pieces. The solid, cast iron base has CNC machined ways. Its
relatively high weight may allow use of vice without fastening it
down. The feed screw features a rolled thread which ensures ease of
movement even with high axial loads. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Professional Drill / Grinder IB/E |
| Usable
for prolonged periods when drilling, milling, grinding, polishing,
cleaning, cutting and even engraving. Ideal for mechanics, model
builders, jewelers, opticians, artists and electronic enthusiasts.
|
| |
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Thicknesser DH 40
New!! |
| The smallest and cuttest in
the world!! Offers a capacity of 80 X 40mm. For smooth vibration-free
thicknessing of hard and soft woods. Load bearing components are all
made of die cast aluminum, with milled seats for bearings and
spindles.
|
| Technical data:
220-240V, 200W, 50/60Hz. Thicknessing to 80mm
wide and 40mm thick. Maximum depth ti cut 0.8mm. Cutter speed 6000
RPM and feed rate 4.8 m/min. Table length 232mm, overall machine
dimensions 280 X 230 X 235 mm. Weight approx 8kg. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Table Saw FKS/E
New!! |
| The ideal machine for
straight, mitre and compound cuts. Usable on all wood types,
non-ferrous metals, plastics (ABS, Pertinax, foam rubber) as well as
rubber, cork, etc.
|
| Technical data:
220/ 240V motor, 50/60 Hz. Electronic spped
control, with feedback effect, for speeds of 4400-6800 rpm. Overall
size: 300 X 262 X 170mm. Table size: 295 X 240mm.
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Micro Miller FFF230
New!! |
| The micro miller FF230 is a
small, accurate milling system used to mill, drill and countersink
steel, cast iron aluminum, brass and plastic. The headstock swivels
360˚, indicated on a scale. Height is adjustable via a zero
adjustable hand wheel, also used as when milling. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Mill/ drill System BFW 40/E
New!! |
| The triple ball
bearing armature provides direct drive (no gearing). This yields
virtually vibration-free operation and extremely high spindle
accuracy. Aluminum die cast head with spindle neck of 43mm (European
standard. |
| Technical data:
Control unit with full wave electronics for
220-240V, 40VDC secondary voltage. Power consumption up to max. 300
Watt. Simple speed infinitely variable between 900 and 6000RPM.
Weight: 4.2kg |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Mill/ drill unit BFB 2000, with tiltig headstock and 140mm throat
depth.
New!! |
| Head with precision milled
dovetail slide and may be tilted through 90˚ to give all-round
versatility: diagonal drilling, versatile without need of special
milling bits, milling diagonal slots. Fine feed selectable, allowing
fine head feed for milling. With dial and depth scale. Geared rack
and pinion feed for effortless drilling with 65 mm stroke.
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Delta sander OZI 220 / E
New!! |
| Oscillating motion far
better than the conventional orbital motion. Sanding pad oscillates
about its centre.
|
| For very tight spots, e.g.
corners, sides and inaccessible areas. |
| Technical data:
Sanding area 65 X 65 X 65 mm. Maximum power
input of 100W / 230V with electronic speed control achieving 3000 to
10000 orbits per minute. Length 230 mm and weight 630 g. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Pensander PS12
New!! |
| This superfine sander with
linear sanding motion (as opposed to rotary or orbital) operates at
8000 strokes per minute with 2.5 mm stroke. It is ideal for
surfaces, slots and tight corners. For sanding arbors with
straight shanks and 4 angled (all different shapes) as well as 3
sheets of pre-profiled self-adhesive sanding pads are included.
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Step clamp set.
New!! |
| Consists of 2
step blocks and 2 clamps, 2 nuts, 2 T slot nuts ( B=7, E=12, D=4 and
C=7,2 mm ) secures objects to approx. 35mm high.
|
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Super Jig Saw SS 220/E
New!! |
| This unit offers fantastic
cutting capacity with footplate adjustable up to 45˚ for mitre cuts.
Housing head is in die cast aluminum.
|
| Stroke 1000 to 4000 per
min. 100W, 240V. Length 230mm, weight 530g. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Belt sander BSL 220/E
New!! |
| For shape finishing,
mortising, fine polishing (flat surfaces). Also for de-burring
metal, paint removal and fine finishing. Head of die-cast aluminum
and full wave electronic speed control. Sanding belt can be changed
in seconds. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Block Belt sander BBS 40
New!! |
| Compact, light and well
balanced for effortless sanding. The sanding belt is open to the
left. 220-240V. 100W max power input. 50/60HZ. Sanding area 60 X
40mm, bel size 40 X 265 mm and speed 275m/min. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Micro shaper MT 300
New!! |
| Used to profile, slot,
route, chamfer, trim and cut. Also used for precision details on
sides and long sections, e.g. doors, flaps and housing components.
Powerful, dust protected motor with toothed belt drive. Double ball
bearing spindle. 220-240V, 50/60Hz, 30 000RPM no load, max input
100W. Table 300 X 140mm. Weight approx. 2.5kg. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Scroll saw DSH
New!! |
| Problem free, even when
cutting acrylics, fiberglass, polystyrene foams, rubber, leather and
cork. The perfect machine for tool and die making, model building,
toy repairs, puzzle sawing, architecture works, antique restoration,
etc. Absolutely safe: Ideal for training schools and training
centers. 220/240V. Two speed 990/1500 strokes/min. Stroke length
19mm. Table 362 X 180mm (tilts up to 45˚ for mitre cutting). Weight
20kg, length 53cm, height 30cm, width 28cm. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Precision vice for the PD 400, milled in steel.
New!! |
| May be used on its side and
back. Jaw width of 60mm, clamping capacity 42mm. Complete with
securing bolts and packed in a wooden box. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Flexishaft Micromot 100/P with truple ball bearings, up to 25 000
RPM.
New!! |
| Two ball bearings in
turned, light aluminum hand piece and one in the drive and prevent
tool bit chatter. The highly flexible shroud and core effortlessly
transmit power without heating up when bent tightly. Anti-kink
springs at the grip and drive end prevent kinks. Spindle threaded
(M8 X 0.75) for keyless chunk 28 941. Micromot collets 1,0 - 2.4 and
3.0mm are applied. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Router table FT 300 |
| The table fits all
mill/drill units with 20mm collars. The 300 X 180mm table is
die-cast in aluminum and supplied with a mitre gauge. The
transparent guard prevents accidental contact with the cutter and
the mitre gauge slides in a machined slot. The drive unit is fitted
under the table in the 20mm collar adapter. Depth of cut is
adjustable by means of a knob and the cutter/drive may be tilted
through 45 degrees. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Cut -off saw KG 220 |
| Work piece is
fastened tightly and accurately with the clamp (with V slot for
round profiles), with extra slot for clamping of model railway
tracks up to HO gauge. Cuts close to clamp: no distorting or tilting
of work piece. Included with machine is a 50 X 1mm ceramic compound
cutting disc with 10mm bore suitable for cutting steel and
non-ferrous metals. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
Vacuum cleaner controller AS/E |
| Switches your dust
extractor or vacuum cleaner on and off. The controller supplies the
power tool (either portable or stationary) and vacuum cleaner with
power. It switches on the vacuum cleaner while the power tool is
operational. Once the powertool is switched off, a 3-second run down
period ensures the workplace is vacuumed. |
|
|
------------------------------------------------------------------------------------------------------------ |
 |
|
KGS80 Cut-off Mitre Saw |
| The laterally moving
headstock (patent DP 103.18.479.1) eliminates any possibility of the
blade and clamping system colliding. The minute spacing between the
kerf and clamping system ensures cutting with a minimum of chatter
and vibration. |
| Technical Data:
220-240V. 200W. 50/60Hz, 4000/min. Base with round table of highly
stable die cast aluminum with CNC milled fittings and slides. |
|
| |
|
