Melt & Cast Monster Clay — Sulphur Free Oil Based Elastic Clay
Monster Clay Premium Grade Modeling Clay is a reusable sulphur free, professional oil/wax based sculpting medium. Composed entirely of non-toxic, food grade components, Monster Clay has an ultra smooth formulation that features a low melt temperature and a low tack feel that will not stick to tools or fingers. Monster Clay has high plasticity and has a unique elastic quality much like soft taffy when warm. At average room temperature Monster is firm enough to capture even the finest details and can be re-used and re-melted indefinitely.
Monster Clay melts easily to a pourable consistency and is great for casting copies of life casts where changes are needed. Cast models do last without slumping or deforming. This sulfur free recipe is compatible with platinum or tin cure silicone molding compounds. Buy it once and re-use it over and over again. Each five pound quantity of Monster Clay Premium is individually packaged in a convenient, reusable ovenable container. Best of all Monster Clay has lower density than the average oil based clays. This means that you receive approximately 25% more clay per pound without the added cost.
Available in soft, medium and hard grades. All can be soften in microwave defrost mode in short burst of 1 minute setting till softness required. Thereafter detailing with sculpting tools when cooled. Cast clay models for stop motion filming as clay is flexible with localised hot air heating and rigid when cooled.
Taxidermists would find this oil /wax base clay malleable to conform to animal profile or pose and might even minimise hide shrinkages as a shrink free oil wax base stuffing.
Detail hand prints in 2D or 3D with warm soft monster clay that copy minute details for Smooth cast 300 PU casting.
Simulate knife wounds, bullet holes, lacerations on Monster clay as model for gelatine, dragon skin or body double casts and attachment rubber casting to body with skin tite adhesive. Prop makers , cosplayers, mold makers as seperator in 2 part silicon molding would find this reusable clay economical in the long run.
Clean up with Isopropyl alcohol or smoothen with industrial heat gun. Do not use naked flame as flammable.
Note: Factory original packing in in a microwavable tub thermosealed with a soft plastic sheet. As a reusable clay any damage to plastic cover in delivery or in display should not be of a concern. To avoid seal damage in despatch purchase double tubs to protect seal.
