Simple to use automatic centre punch. Mark with marker where to locate or drill hole. Place punch needle over marked point. Press with palm gradually downwards till the retracted needle recoil thus leaving a depressed punched mark. On this mark rest your drill bit point to commence drilling. Punch to permanently mark metal, wood, leather, stone, and other hard surfaces. Do not mark on glass or ceramic as the strong recoil will shatter the piece. On thinner aluminium cans or sheet it will punch through. Set include 2 spare needles. To change needle unscrew the front end. Take care not to loose the 2 recoil springs at both ends.
CONTACT US
| Multifilla (M) Sdn. Bhd. (Reg. No: 198501005710 (138151-A)) |
|
| No. 1, Jalan Perusahaan 2/2, Taman Industri Selesa Jaya, 43300 Balakong, Selangor Darul Ehsan, Malaysia. |
|
| +603-8961 3686, +603-8961 3657, +603-8964 4388 |
|
| +603-8961 3637 | |
| enquiry@multifilla.com | |
| 3.021606 ; 101.74269 |
