Three-jaw steel drill chuck
For all prepared MICROMOT devices. Advantageous when working with different shafts. Capacity 0.3 – 3.2mm. A standard attachment in Micromot 240/E, 60/EF and FBS 12/EF
NO 28 941
Note:
Drill chucks provide more convenience to quickly change the tools when working with shafts of varying diameters (e.g. HSS drills as per DIN 338). However, because of their technical setup, they have a few drawbacks compared to collets: Less clamping force and higher concentricity tolerances. If high precision is necessary, then working with MICROMOT steel collets is a must.