MICRO bandsaw MBS 240/E
Solid, ribbed die-cast aluminium housing (no tubular or sheet metal construction).
Double ball bearing mounted aluminium pulleys. Sturdy, plane-milled table with slot for mitre gauge (tilts through 45° for accurate mitre sawing). Triple ball bearing blade guide system, adjustable in height and width for different widths of saw blades. Low noise 220V motor (high quality, for quiet, prolonged use) with Optibelt toothed belt.
Electronically controlled speed for exceptionally accurate cutting (no subsequent finishing necessary !). A table indicates the recommended speed for practically all kinds of material. The blade size of 5 x 0.4mm is ideal for fine work and allows for cutting of small radii.
Perfect bandsaw for cutting mini planks, battens, squares for miniature dioramas
Technical data:
230V. Blade speed adjustment from 180 to 330m/min (feedback effect). Throat 150mm, maximum height 80mm. Table 200 x 200mm (tiltable from 0° to 45°). One blade 1,065 x 5 x 0.4mm (14 TPI) is included.
NO 27 172
Accessories for the MICRO bandsaw MBS 240/E
TPI stands for the number of teeth per inch (25mm) per bandsaw blade.
Blade guide, separately
NO 28 187
Standard bandsaw blade
Of hardened Swedish steel. Fine-toothed (24 TPI). For steel and brass.
NO 28 174 1,065 x 5 x 0.4mm
As above,
but coarse toothed (14 TPI).
NO 28 176 1,065 x 5 x 0.4mm
Extra narrow bandsaw blade (3.5mm) for tight radii
Of special tempered steel, with induction-hardened coarse teeth (14 TPI). Especially suited for aluminium and plastics.
NO 28 180 1,065 x 3.5 x 0.5mm
Bandsaw blade of bimetal
Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 – 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.
NO 28 172 1,065 x 6 x 0.6mm
- HSS flat wire
- Carrier belt of alloyed tempering steel
- Special welding process
Diamond blade
For cutting stone, ceramics, glass or glass-fibre reinforced plastics. Only proper cooling of the diamond band will ensure optimally cut glass or ceramics and enable a long service life of the band. Sparingly coolant liquid can be applied with a brush.
NO 28 186 1,065 x 3 x 0.3mm
Band knife of hardened spring band steel (without teeth)
For cutting foam, plastic, rubber, leather, cardboard and paper board.
NO 28 184 1065 x 6 x 0.4mm
Proxxon Bimetallic Bandsaw Blade for MICRO Bandsaw MBS 240/E (28172)
Swedish Steel Blade – Fine Toothed (24 TPI) for MBS 240/E (28174)
Proxxon Swedish Steel Blade for MBS 240/E, Coarse Toothed (14 TPI) (28176)
Proxxon Special Tempered Swedish Steel Blade for MBS 240/E (28180)