Formulated from Carnauba waxes, fine metallic powders, and select pigments for a finish no paint can duplicate. Rub onto clean, dry, or previously painted surfaces or on post-fired ceramics with a finger or soft cloth, then gently buff to a beautiful luster. More buff, more shine! Five times more product than other brands.
It’s so easy to apply. Just rub onto any surface with finger or soft cloth, then buff to a beautiful luster. Seal with H20 covercoat varnish. Rub ‘n Buff is ideal for:
• restoring cherished antiques
• stenciling
• frame finishing
• antiquing
• home decor
• restoration
• crafts projects
Removing Rub ‘n Buff from carpeting or clothing
Scrape away any excess Rub ‘n Buff from the surface. Apply Dawn dish soap or Simple Green at full strength by working it in with your fingers. Allow to set and work for 3-4 minutes.
Carpet: Using a clean rag and clear, warm water, begin removing the cleaner and product. Rinse frequently. You may have to repeat this procedure more than once to completely clean the area.
Clothing: Treat the area as described above and put clothing into the washing machine.
Rub ‘n Buff dries to the touch in just 30 to 45 minutes. However, to ensure the wax completely cures and won’t smudge or rub off during handling, you should allow it to set for a full 24 hours.
For the best application and drying process:
Apply thin: Use your finger (gloved) or a soft cloth to apply a very small, thin amount.
Buffing: Wait about 1 to 2 hours for it to dry slightly, then buff it with a soft microfiber cloth or clean cotton sock to create a polished, shiny finish.
Second Coat: If you need a second layer, wait a full 24 hours for the first coat to completely cure before applying more.
NOTE: Do not use cleaners that contain solvents as these may cause the Rub ‘n Buff to disperse into the carpet padding.
Rub ‘n Buff cannot be shipped by air.
